Max Water 6 Stage Aquarium Reverse Osmosis System/Reverse Osmosis System/RO Water Filtration System RO Water Purifier 100 GPD Hydroponics RODI System

Price: [price_with_discount]
(as of [price_update_date] – Details)

[ad_1]

Product Description

6 Stage Reverse Osmosis Systems

Why Use our Reverse Osmosis Systems?

Our 6-stage under-sink reverse osmosis system gives you pure, fresh water. Like all of our RO systems

Physical Dimensions

RO Unit: 15″ x 6″ x 17″.

Product to Waste Ratio

Waste Ratio 1 RO : 2 Waste.

Filtration Process Sediment The Granular Activated Carbon (GAC) improves taste Carbon Block (CTO) The RO Membrane The Mixed Bed Deionization (DI) filters further purify the water via lowering ions. Post Carbon as the finishing stage polishes the filtered water and improves quality and taste.

If you live in an area with exceptional high levels of Total Dissolved Solids (TDS) in your water supply, the Mixed Bed Deionization Filter

Filtration Process

Pre Filters + RO Membrane

Protects the RO Membrane from dogging with three stages: Polypropylene Sediment, Granular Activated Carbon (GAC), and Carbon Block (CTO) filters.The semipermeable RO Membrane is the main filter

We recommend replacing the system’s RO Membrane every 2 years for best performance.

Mixed Bed DI Filter

The Mixed Bed Deionization Filter passes water through ion exchange material replacing them with hydrogen or hydroxyl ions. The hydrogen and hydroxyl then reform to produce pure water.

Post Filter

The Post Carbon Filter, also known as the “Polishing Filter”

Stages of Filtration 1st Stage: 5 Micron Polypropylene Sediment Filter 2nd Stage: Granular Activated Carbon (GAC) Filter 3rd Stage: 5 Micron Carbon Block (CTO) Filter 4th Stage: TFC RO Membrane 5th Stage: Refillable Inline Mixed Bed DI Filter 6th Stage: Inline T33 GAC Coconut Shell Carbon Filter

Specifications

Includes 6-stage RO unit with pre-filter housings, RO Membrane, One set of installed pre-filters, Housing wrench and installation accessory pack. Rejection Rate 95-98% of TDS depending on incoming water TDS home water pressure and temperature. Physical Dimensions RO Unit: 15″ L x 6″ D x 17″ H Product to Waste Ratio 1:2 Total Weight Approx. 27 lbs. Operating Temperature 40-104 degrees F / Max temperature 40 degrees C. System Operating Pressure 45-75 PPO Waste Ratio 1 RO : 2 Waste, No Power Required PSI Information For well water supply; please add a booster pump even if your pressure set between 50 to 70 PSI. Lower than 45 PSI, you must add a booster pump + high pressure shut-off switch. Higher than 75 PSI, add a pressure control valve to fix the pressure @60-65PSI Warning This system should only be used with a safe water supply. Additional Info Filter cartridges should be changed every 6-12 months under domestic conditions. Filter life varies and depends on the water source quality.

1: Valve Adapter

2: Sediment Filter and Housing

3: GAC Filter and Housing

4: CTO Filter and Housing

5: Nipple

6: 1/4” Male Elbow with Double O-rings

7: Auto Shut-off Valve

8: Check Valve

9: 1/4” Male Elbow

10: RO Membrane and Housing

11: 1/4” Male Tee Run

12. 1/4″ Male Straight

13. 1/4″ Straight Shut Off Ball Valve

Faucet and Filter Housings will vary with system options.

14: Flow Restrictor 15: Drain Saddle 16: Inline Mixed DI Filter 17: Inline Post Carbon Filter 18: Faucet

Waste Ratio 1 RO : 2 Waste, No Power Required
92% – 98% of TDS from the incoming water
Operational water pressure 45 to 75 PSI City water
For well water supply; please add a booster pump even if your pressure set between 50 to 70 PSI
1-year Manufacturer’s warrant, Manufactured in Canada

[ad_2]